Adjusting the working depth of the side guide plates

The side guide plates keep the displaced soil within the implement. The side guide plates must be adjusted so that the side discs do not form soil ridges or soil furrows.

The height and length of the side guide plates can be adjusted on the holding arms and via the hole patterns.

IMPORTANT
Damage due to the side guide plates being adjusted too low
Adjust the side guide plates at a distance of at least 1,18 in (30mm) from the ground.
  1. Lift the implement slightly.
  2. Unscrew the bolts on the side guide plates.
  3. Adjust the height and longitudinal spacing of the side guide plates.
  4. Tighten bolts.
  5. Check the adjustment when operating the implement.