Checking the V-ribbed belt

Interval

  • all 200 Operating hours

    or

    Every 12 months

  1. Remove the bolt 1 and nut 2.
  2. Slide the bush 3 onto the connecting shaft.
  3. Disconnect the connection on both sides.
  4. Remove the connecting shaft.
  1. Remove the fastening bolt 1.
  2. Unscrew the fastening bolt 2.
  3. Remove the upper protective cover 3.
  4. Check the V-ribbed belt.

If damage, fraying, transverse cracks or broken ribs are visible, replace the V-ribbed belt.

  1. Loosen the lock nut 2.
  2. Loosen the bolt 3.

The tension roller 4 is relieved.

  1. Remove the bolts 1.
  2. Remove the lower protective cover 2.
  1. Replace the V-ribbed belt 1.

  2. To tighten the V-ribbed belt,

    see Tightening the V-ribbed belt.

  3. To check the concentricity,

    rotate the drive.
  4. Install the lower protective cover.
  5. Install the upper protective cover.
  6. Install the connecting shaft between the drive shafts.