Setting the tripping force for the central overload safety

REQUIREMENTS

  • The implement is coupled.

  • The beige hydraulic connection is coupled.

WARNING
Risk of accident due to the plough bodies falling down
When you depressurise the hydraulic overload safety, the plough bodies fall out of their mount.
Select a pre-tension of at least 80 bar for the hydraulic overload safety.
Always maintain pressure on the hydraulic overload safety.
  1. Open the stop tap.

  2. To set the tripping force of the hydraulic overload safety simultaneously for all plough bodies,

    Actuate the beige tractor control unit.

Select a pre-tension between 80 and 180 bar. Default value: 100 bar

  1. Close the stop tap.
  2. Depressurise and uncouple the beige hydraulic connection.
NOTE
To increase operational reliability, the hydraulic accumulator on each plough body can be closed with the hand lever.
Central adjustment of the pre-tension is then no longer possible.
By closing individual hydraulic accumulators, the tripping force can be adjusted differently on the plough bodies.
The parking position of the hand lever is located on the headstock.