Aligning implement with hydraulic drawbar to transport height

The graphic shows the implement in horizontal position and with correctly adjusted transport height. The correct transport height is reached when the pivot point of the drawbar is at the specified height.

A spirit level is attached on the implement frame. The spirit level shows the alignment of the implement in the direction of travel.

1

Maximum transport height < 13,12 ft (4m)

2

Height of the drawbar pivot point: Catros = 0,45 in (1,15cm) and Catros XL = 0,41 in (1,05cm)

3

Height of the inner side plates of the sections Catros = 16,54 in (42cm) and Catros XL = 11,42 in (29cm)

  1. Drive the tractor and implement on a horizontal surface.
  2. Lift drawbar via the yellow tractor control unit.

The horizontal alignment of the hydraulic drawbar is secured with spacer elements.

  1. Pull the linch pin 1.
  2. Pull the pins 2.
  3. Swing down all spacer elements 3.
  4. Lower drawbar via the yellow tractor control unit.
  5. Insert pin.
  6. Secure the pin with a linch pin.

  7. To align the implement horizontally in transport height on the running gear,

    Activate the yellow tractor control unit.