Adjusting the three-point mounting frame for mounting category 2

Dimension ‒ mounting category 2

Diameter

A

0,98 in (25mm)

B

1,1 in (28mm)

  1. Use mounting category 2 top link pins 1 and lower link pins 2.
  1. Insert the lower link pins 1 into the receptacles from the outside.
  2. Insert the bolts 2 into the bores from the inside.
  3. Tighten the bolts of the lower link pins.

For the top link pin 1 of mounting category 2, adapter sleeves 2 are required.

  1. Insert the top link pin together with the adapter sleeves and the ball sleeve 4 into one of the bores.
  2. Secure the top link pin with a linch pin 3.