Implement with support wheels is not horizontal

The tire pressure of the support wheels is incorrect

  • Correct tire pressure.

Support wheel tires are worn

  • Have worn tires replaced.

Support wheels are incorrectly adjusted

  • Align implement horizontally with the lower link or the hydraulic drawbar.

  1. If the implement is not horizontal:

    Check the length of the adjustment spindles.

Default setting: 21,26 in (540mm) length

NOTE
If the length of the adjustment spindle is increased, the transport width of the implement is increased.
Do not exceed the permissible transport width.
  1. Unscrew the lock nuts 1 on the adjustment spindles.
  2. First adjust the inner support wheels using the hexagonal profile.
  3. Set the adjustment spindles on all of the support wheels to the same length.
  4. Tighten lock nut.